Featured products

Spectrum AquaPrint is a water-soluble support material designed for complex multi-extrusion 3D printing. AquaPrint boasts a flow rate almost four times higher in comparison to PVA-based support filaments and reduces dissolving time in the water by half. However, the standout feature of AquaPrint is its exceptional adhesion to different materials like PLA, PETG, PA and TPU, offering twice the bonding strength compared to PVA.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 filament is characterized by very good mechanical strength, flexibility and excellent adhesion of individual layers. Tarfuse PA6 is a filament dedicated to printing functional and technical parts in such industries as automotive, mechanical engineering, railways, construction industry, and electrical engineering.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

Everfil Silk 3D printing filament is made by a Polish manufacturer 3DKordo. It is made of PLA with dye concentrates giving the effect of a satin structure. It is an element with functional properties, attractive to 3D printing enthusiasts looking for other alternative design solutions. The satin structure of print layers limits the visibility of layers on the surface of manufactured elements. Filament with a high gloss surface. Suitable for FFF/FDM applications from thin and complex parts to thicker cross-sections. It is one of the most popular fibres in the 3D printing market due to its appearance in printing, low melting point and the possibility of smooth and accurate prints.

Polymaker PolyLite PLA filament 1,75 mm, that changes colour from green to lime under the influence of temperature. Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

250˚C – 270˚C

Printing Speed:
30 – 50mm/s

Bed Temperature:
90˚C – 105˚C

Chamber Temperature:
90˚C – 100˚C

Young’s Modulus:
1832 ± 65 (MPa)

Tensile Strength:
39.9 ± 1.0 (MPa)

Bending Strength:
66.3 ± 1.3 (MPa)

Charpy Impact Strength:
25.8 ± 1.4 (kJ/m2)

Spectrum PCTG GF10 is a technical filament with high stiffness and hardness. Thanks to its extremely high interlayer adhesion and low shrinkage, it allows even intermediate users to execute large prints. In addition, the glass fibres give the prints a distinctive texture, which, in addition to its undoubted aesthetic qualities, also translates into increased usability. Models made from Spectrum PCTG GF10 can be used wherever increased adhesion, increased durability against cyclic load and chemical resistance are important.