Gel-Lay Filament 1,75 mm, coil 250 g
Description
Gel-Lay is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. Gel-Lay filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a soft, porous item. Importantly, the pores are not visible to the naked eye. The Gel-Lay filament is characterized by negligible deformation during printing.
Recommended printing temperature: 230-240 °C
Gel-Lay ingredients are harmless and food safe.
The filament should be stored in dry a place. If the material has absorbed moisture, the fibre can be dried at around 80°C for four to five hours. Check the drying of the filament before the first print.
Nominal diameter | 1.75 mm |
Material | Gel-Lay |
Colour | beige |
Printing temperature | 220 - 240 °C |
Hardness | not necessary, likely 50 °C |
Length | > meter |
Weight | approx. 250 g |
The filament comes in a reseable zip bag.