Featured products

Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Polymaker PolyMax PETG-ESD 3D printing filament combines the properties of PETG with the ability to control electrostatic discharge, making it a suitable material for applications requiring ESD protection, such as electronic component packaging, fixtures, jigs, or assembly tools used in ESD-sensitive environments.

PolyMax is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality. PolyMax PETG offers better mechanical properties than any other regular PETG making it a good candidate for a wide range of applications.

PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.

PolyMax™ PETG offers better mechanical properties than any other regular PETG making it a good candidate for a wide range of applications.

Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of navy blue PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Filament produced on request marwiol by Polish manufacturer 3D Kordo.

Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is material friendly for beginners, the material is available in covering and transparent colours.

PLA filament for 3D printing by Czech manufacturer Plasty Mladec. The Plasty Mladec material is a guarantee of the quality and dimensional accuracy of the PLA filament, thanks to which you will get perfect prints.

Tarfuse® Simply PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

The highest quality filament for 3D printing nylon PA12 was made by a recognized Polish manufacturer, Devil Design. Nylon PA12 is a semi-crystalline plastic that is resistant to high temperatures and chemicals. Items printed with this 3D printing filament can be finished with metalworking tools. The Devil Design nylon PA 12 filament is wound on a spool, vacuum packed with a moisture absorber. The spool contains 0.33 kg of net material.

PET-G is fairly stiff, strong and impact-resistant. These characteristics make the material highly suitable for lightweight products. 

Recommended printing temperature 230-260 °C

Heated bed temperature - 70°C

You can print at 90mm/s. Similar to print with PLA