Devil Design StartPack PLA sweet 1,75 mm, 6 x 0,33 kg
The Devil Design StartPack PLA 1,75 mm is a set of 3D printing filaments PLA 1.75 mm from a recognized Polish manufacturer, Devil Design, witch contains 6 spools of 0.33 kg each of 3D printing filament in "sweet" shades of red, pink and purple.
PLA Devil Design Start Pack is the perfect option to start your 3D printing adventure.
Shipment date:: 24 hours
Polymaker PolyTerra PLA filament 1,75 mm, sunrise orange, 1 kg
PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.
Shipment date:: 24 hours
Polymaker PolyFlex TPU95 filament 1,75 mm, black, spool 0,75 kg
PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.
PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.
Shipment date:: 24 hours
Polymaker PolyPlus PLA filament 2,85 mm, translucent yellow, spool 0,75 kg
Polymaker PolyPlus PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.
Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyPlus PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!
Shipment date:: 24 hours
Tarfuse PLA LM (laser marking ) black filament 1,75 mm, 0,5 kg
Tarfuse® Simply PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.
Tarfuse® PLA LM filament contains an additive for laser marking the printed part using the Nd/YAG laser.
Shipment date:: 24 hours
Tarfuse Simply PLA red filament 1,75 mm, 1 kg
Tarfuse® Simply PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.
Shipment date:: 24 hours
LayFomm 40 filament, 2,85 mm, 0,25 kg
The LayFomm 40 is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. LayFomm 40 filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a very porous and flexible object that looks like foam. LayFomm 40 is slightly softer than LayFomm 60.
Shipment date:: 24 hours
Devil Design PETG filament, 1,75 mm, galaxy (sparkly) grey, 1 kg
Sparkly grey PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
Polymaker PolyLite PLA filament 1,75 mm, glowing blue in the dark, 1 kg
Polymaker PolyLite PLA contains an additive thanks to which the printed element glows with its own, in this case, blue, light after prior exposure to light from the outside. Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.
Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!
Shipment date:: 24 hours