Tarfuse PLA LM (laser marking ) black filament 1,75 mm, 0,5 kg
Tarfuse® Simply PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.
Tarfuse® PLA LM filament contains an additive for laser marking the printed part using the Nd/YAG laser.
Shipment date:: 24 hours
Smart Clean filament 1,75 mm, natural, 0,33 kg
Clean your printer extruder to have better maintenance of your 3D printer and also increase the lifetime of your hotend.
When you use different filaments in your 3D printer, eventually you can get obstructions and defects in your printing. Smart Clean filament is thought out to clean the extruder completely. This way you will guarantee the correct working and maintenance of your 3D printer.
Shipment date:: 24 hours
Smartfil EP: machinable PLA filament 2,85 mm, white, 0,75 kg
This filament is a modified PLA to make it machinable and obtain a completely smooth surface finish. Sanding it with sandpaper together with water leaves a similar finish to ceramic. It can also be painted with any kind of paint. It is recommended for architecture, odontology, restoration, models, imitations of sculptures, etc…
Shipment date:: 24 hours
Prografen PLA filament (PLA with the addition of graphene) 0,5 kg
Prografen PLA Graphene Strong is a high-quality polymer 3D printer filament created from renewable materials. This filament was developed in response to market demand for a professional material that would unleash the full potential of the latest generation of 3D printers. PLA with the addition of graphene allows for the production of precise details at ultra-high printing speeds without issues with voids or stringing. This is possible due to its high MFR and extremely low shrinkage. The components of the filament are poly(lactic acid) and a 6% allowance of EFG (Edge Functionalized Graphene) flake graphene. In addition, the material does not require special nozzles or climate chambers. Graphene doping also increases the stiffness of the material by over 15% compared to pure polymer.
Shipment date:: 24 hours
Smartfil ABS H.I.: high-impact ABS filament 1,75 mm, natural, 0,75 kg
SMARTFIL ABS H.I.: high-impact 3D printing filament ABS that ABS printing filament was modified to increase its resistance to impact. SMARTFIL ABS H.I.: high-impact 3D printing filament ABS has an excellent finish and Its behaviour is very stable against very large pieces. It is very recommendable for automotive parts, protective helmets, industrial pieces, etc…
Shipment date:: 24 hours
Tarfuse PLA LM (laser marking ) black filament 1,75 mm, 1 kg
Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.
Tarfuse® PLA LM filament contains an additive for laser marking the printed part using the Nd/YAG laser.
Shipment date:: 24 hours
Smartfil EP: machinable PLA filament 1,75 mm, black, 0,75 kg
This filament is a modified PLA to make it machinable and obtain a completely smooth surface finish. Sanding it with sandpaper together with water leaves a similar finish to ceramic. It can also be painted with any kind of paint. It is recommended for architecture, odontology, restoration, models, imitations of sculptures, etc…
Shipment date:: 24 hours
Smartfil EP: machinable PLA filament 1,75 mm, white, 0,75 kg
This filament is a modified PLA to make it machinable and obtain a completely smooth surface finish. Sanding it with sandpaper together with water leaves a similar finish to ceramic. It can also be painted with any kind of paint. It is recommended for architecture, odontology, restoration, models, imitations of sculptures, etc…
Shipment date:: 24 hours
Tarfuse PETG FR (non-flammable) filament, 1,75 mm, natural, 0,5 kg
Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterized by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterized by high ease of printing, at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus and asbestos.
Shipment date:: 24 hours
Smartfil Boun: flexible filament PLA 1,75 mm, 0,75 kg
Smartfil Boun is a very flexible filament based on PLA developed by Spanish manufacturer Smart Materials 3D with mechanical properties similar to polypropylene. Due to its flexibility, you can develop completely semi-rigid figures very resistant to impact, we can obtained pieces with an exceptional finish and a very nice soft touch that will not remind you of plastic. It is a material compatible with most printers in the market because it does not need to have a heated base, in addition, Smartfil Boun is a material without contractions or warping so you can make pieces of any size.
Shipment date:: 24 hours
Smartfil Boun: flexible filament PLA 2,85 mm, 0,75 kg
Smartfil Boun is a very flexible filament based on PLA developed by Spanish manufacturer Smart Materials 3D with mechanical properties similar to polypropylene. Due to its flexibility, you can develop completely semi-rigid figures very resistant to impact, we can obtain pieces with an exceptional finish and a very nice soft touch that will not remind you of plastic. It is a material compatible with most printers in the market because it does not need to have a heated base, in addition, Smartfil Boun is a material without contractions or warping so you can make pieces of any size.
Shipment date:: 24 hours
Spectrum PCTG GF10 filament 1.75mm NATURAL 0,5kg
Spectrum PCTG GF10 is a technical filament with high stiffness and hardness. Thanks to its extremely high interlayer adhesion and low shrinkage, it allows even intermediate users to execute large prints. In addition, the glass fibres give the prints a distinctive texture, which, in addition to its undoubted aesthetic qualities, also translates into increased usability. Models made from Spectrum PCTG GF10 can be used wherever increased adhesion, increased durability against cyclic load and chemical resistance are important.
Shipment date:: 24 hours
Smartfil F.P.: fireproof ABS filament 1,75 mm, natural, 0,75 kg
The ABS Fireproof 3D printing filament by a Spanish manufacturer, Smart Materials 3D, is a flame retardant material tested according to UL94 and IEC 60695-11-10, ideal for coating elements that may be a source of fire.
The ABS Fireproof 3D printing filament is ideal for coatings or casings to protect electrical circuits or elements from the risk of generating fire.
Shipment date:: 24 hours
Smartfil F.P.: fireproof ABS filament 2,85 mm, natural, 0,75 kg
The ABS Fireproof 3D printing filament by a Spanish manufacturer, Smart Materials 3D, is a flame retardant material tested according to UL94 and IEC 60695-11-10, ideal for coating elements that may be a source of fire.
The ABS Fireproof 3D printing filament is ideal for coatings or casings to protect electrical circuits or elements from the risk of generating fire.
Shipment date:: 24 hours
MoldLay (casting wax) filament 2.85 mm, coil 250 g
MoldLay filament is a wax material for 3D printing, designed to create casting moulds for castings using the lost wax method. The printing process of MoldLay filament is similar to PLA filament (printing temperature up to 170-180°C). The difference with the standard 3D printing filaments appears after heating the printed form to a temperature of 270°C. At this temperature, MoldLay transforms into a low-viscosity fluid, allowing easy mould removal of the casting mould.
Shipment date:: 24 hours
MoldLay (casting wax) filament 1.75 mm, coil 250 g
MoldLay filament is a wax material for 3D printing, designed to create casting moulds for castings using the lost wax method. The printing process of MoldLay filament is similar to PLA filament (printing temperature up to 170-180°C). The difference with the standard 3D printing filaments appears after heating the printed form to a temperature of 270°C. At this temperature, MoldLay transforms into a low-viscosity fluid, allowing easy mould removal of the casting mould.
Shipment date:: 24 hours
Spectrum PETG Carbon filament 1,75 mm 0,5kg
Spectrum PET-G Carbon is a modified, PETG-based filament blended with carbon fibres which contributes to a considerably higher rigidity, hardness and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for pure PETG. The 10% addition of carbon fibres enables to obtaining of matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.
Shipment date:: 24 hours
Tarfuse PA6 LM (laser marking ) black filament 1,75 mm, 0,5 kg
Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
The Tarfuse® PA LM filament, made of polyamide 6 (PA6), has excellent mechanical properties as well as thermal and chemical resistance Contains an additive for laser marking of the printed part using the Nd/YAG laser.
Shipment date:: 24 hours