PETG 1,75 mm

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterized by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterized by high ease of printing, at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus and asbestos.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterized by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterized by high ease of printing, at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus and asbestos.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PETG AM filament is a PETG filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.

Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PETG AM filament is a PETG filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.

Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.

Spectrum PETG Premium is made by a Polish manufacturer Spectrum Filaments. It is the second most popular material for desktop 3D printing. A major advantage provided by Spectrum PETG Premium is the virtually zero shrinkage rate and low absorption of moisture as compared to other thermoplastics used for FDM/FFF 3D printing. Items manufactured with PETG maintain stable properties over a long life. Spectrum PETG Premium combines the advantages of PLA and ABS. It also provides nearly trouble-free printing and exceptional adhesion between layers.

Spectrum PETG FR V0 is a new halogen-free, flame-resistant 3D printing material based on the ever-popular PETG. The filament is designed according to UL 94 V0* flammability rating requirements, meaning that the vertical burning of the filament or printed part does not exceed 10 seconds. Most typical plastics have poor flame resistance, which is why the Spectrum PETG FR V0 filament was developed with flame-resistant or self-extinguishing properties to provide a high level of safety in everyday or working environments. The applied modifications do not affect the printability of the filament, which helps maintain the classic properties of PETG, i.e. simplicity and efficiency of printing, with very low shrinkage and relatively high tensile strength.

Spectrum PETG FR V0 is a new halogen-free, flame-resistant 3D printing material based on the ever-popular PETG. The filament is designed according to UL 94 V0* flammability rating requirements, meaning that the vertical burning of the filament or printed part does not exceed 10 seconds. Most typical plastics have poor flame resistance, which is why the Spectrum PETG FR V0 filament was developed with flame-resistant or self-extinguishing properties to provide a high level of safety in everyday or working environments. The applied modifications do not affect the printability of the filament, which helps maintain the classic properties of PETG, i.e. simplicity and efficiency of printing, with very low shrinkage and relatively high tensile strength.

Spectrum PET-G Carbon is a modified, PETG-based filament blended with carbon fibres which contributes to a considerably higher rigidity, hardness and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for pure PETG. The 10% addition of carbon fibres enables to obtaining of matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.

PETG MDT is a filament for 3D printing designed to be detected by any type of auto switch, even when the material is present in very small particles.

This property makes it especially suitable for the food industry, where the absence of contaminants of any origin is essential. It is also recommended for the manufacturing of sensors, smart packagings, etc. In addition, this filament possesses high dimensional stability. It can be in contact with food and resistant to moisture, fungi and mould.

PROGRAFEN PETG GRAPHENE STRONG is a high-quality polymer filament for 3D printers created based on polyester resin. This filament has been developed in response to market demand for a professional material that, despite its high mechanical strength, allows effortless printing at high printing speeds. In addition, the material does not require special nozzles or climate chambers. The components of the filament are polyethene terephthalate, ethylene glycol and a 6% allowance of EFG (Edge Functionalized Graphene) flake graphene. The material exhibits minimal shrinkage allowing for extremely good dimensional stability of the printed parts. The addition of graphene results in a 25% increase in the tensile strength of the material and a 20% increase in stiffness compared to pure polymer.

PROGRAFEN PETG GRAPHENE STRONG is a high-quality polymer filament for 3D printers created based on polyester resin. This filament has been developed in response to market demand for a professional material that, despite its high mechanical strength, allows effortless printing at high printing speeds. In addition, the material does not require special nozzles or climate chambers. The components of the filament are polyethene terephthalate, ethylene glycol and a 6% allowance of EFG (Edge Functionalized Graphene) flake graphene. The material exhibits minimal shrinkage allowing for extremely good dimensional stability of the printed parts. The addition of graphene results in a 25% increase in the tensile strength of the material and a 20% increase in stiffness compared to pure polymer.

Polymaker PolyMax PETG-ESD 3D printing filament combines the properties of PETG with the ability to control electrostatic discharge, making it a suitable material for applications requiring ESD protection, such as electronic component packaging, fixtures, jigs, or assembly tools used in ESD-sensitive environments.

PolyMax is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality. PolyMax PETG offers better mechanical properties than any other regular PETG making it a good candidate for a wide range of applications.

PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.

PolyMax™ PETG offers better mechanical properties than any other regular PETG making it a good candidate for a wide range of applications.

Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance.

Polymaker PolyLite PETG is an affordable PETG filament with balanced mechanical properties and ease of printing. PolyLite PETG is just as easy to print as PolyLite PLA while offering an additional 20˚C heat resistance and more durability. This lends PolyLite PETG to more functional applications where PLA would lack the durability or heat resistance such as lighting fixtures, vibrational parts or more functional product design prototypes.

Polymaker PolyLite PETG is an affordable PETG filament with balanced mechanical properties and ease of printing. PolyLite PETG is just as easy to print as PolyLite PLA while offering an additional 20˚C heat resistance and more durability. This lends PolyLite PETG to more functional applications where PLA would lack the durability or heat resistance such as lighting fixtures, vibrational parts or more functional product design prototypes.

The PETG material is essentially the same as the known PET material from which PET bottles are made. The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET so that it’s easier to print and less brittle. It is a strong and tough material, which is characterized by good thermal stability. Thanks to the small shrinkage during printing, it is suitable for printing large objects. PETG has mechanical and thermal properties better than ABS and bears the printing properties of PLA.